Complete ECM package ready for install for 82 and 84 automatic corvette along with the 84, 4+3 Doug Nash manual transmission CFI Corvettes and 82/83 Camaro, Firebird and Trans Am.

Is your ECM dead and you have been looking for a simple solution to your non running 82/84 CFI Corvette and 82/83 Camaro, Firebird and Trans Am and can’t find any replacement ECMs anywhere? Look no further…This is the same EBL Flash II that comes from Dynamic EFI with USB cable attached for your laptop PC. We are now going to stock this item to make it easier on our customers and this item will have our famous unique HAM interface board (Harness Adapter Module) permanently installed so the EBL ECM is ready to install into your Corvette, Firebird, Camaro or Trans Am.

This will be a plug-n-play type package. The package and will come preloaded with the stock 82 and 84 Corvette tune developed for us and is ready to install and drive. It will also come with a CD with all the items you might need. You can load it to your PC desktop or laptop, but since the EBL Flash II will come preloaded with our tune, there really isn’t any need to load the software unless you want to just run it and datalog your runs, load the 84 corvette 4+3 tune provided on the CD or the Firebird, Camaro and Trans Am base tunes also on the CD provided. You will still be able to change the tune if you like with TunerPro RT. We do not lock the tunes, but we don’t recommend changing it, it’s that good for a stock Corvette. There is NOTHING on the market or ever has been for the crossfire injection community until now that makes this such a simple install. The real beauty of this ECM is that if you decide at a later date to add power enhancements to your CFI engine like, heads, cam, headers, larger TBs and larger injectors, NOS etc., you can. You can also easily tune the engine for more performance, building off of the stock tune as a great base starter bin starting point.

ADVANTAGES AND HIGHLIGHTS OF USING THE EBL ECM:

There is no cutting or splicing of any kind on your car harness with this unit. Just remove your bad original stock ECM and plug the EBL in, turn the key to ON and GO!

• Your engine will run better.

• High speed data logging (if desired).

• 100% fully user programmable using a PC based laptop with a USB port. Windows 10/11 recommended, but not essential.

• ECM software is enhanced with larger tables and added functionality.

• The What's Up Display (WUD) software provides a Windows based graphical interface display along with analysis screens.

• Documented calibration parameters & tables for the new ECM code along with ECU and XDF definition files are provided. (used to edit the calibration tables if desired)

• Hardware is industrial temperature specified and conformal coated for reliability and long life.

*The EBL ECM can also be used in your 82/83 Thirdgen Camaro, Firebird and Trans Am CFI vehicles. The only difference is the tune used which is also supplied on the CD provided with the EBL ECM.

**OUT OF COUNTRY PURCHASES

If you are outside the USA and want to purchase an EBL ECM or any other item on this site, please contact me via the Contact page and an invoice will be sent. This site is not set up to handle foreign country purchases directly. Also, I refuse to send to some country’s that I have been scammed by, the list is on here in the Blog. Sorry if you happen to live in one of those country’s, but NO EXCEPTIONS.

NOTE: Also included on the EBL board, are eight analog input channels and two ground terminals. The data from these inputs are included in real time with the ECM data. These analog inputs can be used for data logging wide band O2 sensors, fuel pressure, and any other 0 to 5V linear device desired like, accelerometer, oil pressure, oil temperature, suspension travel, and more...

NOTE:The 84 corvette has a little different ECM mount than the 82 corvette mount and the EBL will not be a direct bolt in like the stock ECM. You may need to get a little creative on the mounting of the EBL on 84 corvettes only. Sorry for any inconvenience, but it is unavoidable.

ALSO NOTE: There is a 15% Restocking Fee on the EBL after it has been returned to XFire Performance for a full inspection, testing and then deemed serviceable at the customers expense. If there is damage to the unit, we will contact you directly. Thank you.

***XFire Performance Embedded Lockers End User Agreement
FOR OFF ROAD USE AND PRE-EMISSIONS VEHICLES ONLY
THE PURCHASER IS RESPONSIBLE FOR DETERMINING THE SUITABILITY
OF THE Embedded Lockers PRODUCT.

Limited Warranty & Liability

Hardware Warranty

XFire Performance warrants that the Embedded Lockers Board (the "Product") will be free from defects in materials and workmanship for a period of one (1) year from the date of receipt. This warranty extends solely to the original purchaser and is non-transferable.

Remedy
In the event of a verified defect covered under this Limited Warranty, XFire Performance and its suppliers' entire liability — and the purchaser's exclusive remedy — shall be limited to one of the following, at XFire Performance's discretion:

(a) A refund of the purchase price paid for the Product, if applicable; or

(b) Repair or replacement of the defective Product.

Software Disclaimer
XFire Performance makes no warranties, expressed or implied, regarding any software provided in connection with the Embedded Lockers product. All software is provided as-is.

Right to Modify Products
XFire Performance expressly reserves the right to make design changes, additions, or improvements to its products at any time without obligation to apply such changes to previously manufactured units.

Indemnification
By purchasing and/or installing the Embedded Lockers product, the buyer agrees to indemnify and hold harmless XFire Performance and its suppliers from any claim, action, loss, or demand arising out of or related to the buyer's installation or use of the Product.

Intellectual Property
The Embedded Lockers product is protected by copyright law, intellectual property laws, and international treaties. XFire Performance and/or its suppliers retain all title, copyright, and intellectual property rights in and to the Product. All rights reserved.

For warranty claims or inquiries, please contact XFire Performance directly.